Ford 6.0 high pressure oil pump replacement time depends on several symptoms. These Symptoms will help you to determine whether you should replace the oil pump or not.
Are you a beginner in this regard? You can simply decide by observing the excessive black smoke only. If you have a little experience in this field then you can also determine by observing EGR Valve Problems.
In this content, I’m going to describe several symptoms, maintenance tips and costing to replace the Ford 6.0 oil pump. So sit on your favorite coach and enjoy the whole content.
When is the ford 6.0 high pressure oil pump replacement time?
The Ford 6.0 High Pressure Oil Pump is a critical component in your car’s engine. It’s important to know when it needs to be replaced. If it stops working properly, you’ll notice several symptoms.
Here are the most 5 common ford 6.0 high pressure oil pump symptoms that will help you to determine whether you should replace or not.
(i) Coolant Leak: Coolant leak is the most common symptom of malfunctioning Ford 6.0 high pressure oil pump. Coolant is used to help circulate oil through the engine.
When this system stops working, the temperature inside the engine rises. Then, the oil starts to expand. So, when you see this type of symptom you should think about replacement.
(ii) Leaking fuel injectors: The 2nd sign of a replacement is Leaking fuel injectors. When this fuel injector leaks, you will notice a decrease in engine performance.
The problem may be caused by wear and tear or by a malfunctioning part. This will directly impact fuel economy and performance of your engine. So, you should be aware before any heavy damage.
You can solve it by replacing or repairing the fuel injectors. You can replace your injectors with Ford Racing M-9593.
But, the wise decision is to replace the both oil pump and fuel injectors as well to prevent the leak quickly.
(iii) Excessive black smoke: Another reason to replace your Ford 6.0 oil pump is excessive black smoke. Probably, it’s the first visible sign that you can realize quickly.
If it happens in a lower RPM range, then you might get it while accelerating. This can happen due to any occurrence in the pump. To solve this from the root, replace the pump from any repair shop.
(iv) EGR Valve Problems: The EGR valves are integrated into the cylinder headhead. It controls the amount of fresh and recirculated air entering the cylinders. If this EGR Valve is damaged, this can cause a number of problems:
- Higher levels of sulfur in the air.
- Smoke coming from the tailpipe.
- Damage to other parts of your vehicle
When you see the EGR Valve issues, you should think about replacing the EGR valve and oil pump as well. EGR can be damaged when any problem occurs in the oil pump. So, it’s high time to replace the oil pump ASAP!
It’s time to say goodbye to the damaged valve and buy the most stable Standard Motor EGR Valve.
(V) Leaking oil cooler o-rings: The last symptoms on our list that you could see is Leaking oil cooler o-rings.
If your oil cooler o-rings leak and make noise when you are driving, then it’s really a problem. If you notice that your Ford engine is leaking around the cap, then it’s time to have the oil pump replaced as well.
What is the Replacement Cost of a Faulty Ford 6.0 Oil Pump?
Oil pump replacement costing depends on three factors.
- Do you want to do this replacement yourself?
- Do you want to hire someone from a repair shop to replace it?
- Lastly: Do you want to go to the store yourself and get the replacement done?
Ford 6.0 high pressure oil pump replacement cost is $350-$3000. If you are an expert yourself it can cost you anywhere from $350 – $500. So, How many hours does it take to replace an oil pump? It depends on your skill. But it will not take more than 4 to 8 hours.
If you want to hire someone from a repair shop to do the job it will cost you between $600-$700.
Also, if you replace it from a repair shop, you can do it for under $500.
Maintenance Tips for Ford 6.0 High Pressure Oil Pump
Maintenance is important to protect your oil pump from major damage. Here are some tips that will keep you safe from getting stuck on a long journey:
(i) Complete a compression check on the motor. It ensures that all cylinders are operating at the right pressure level.
(ii) Use a digital pressure gauge to measure and record all pressure readings for each cylinder
(iii) Request an estimate for replacement of the high pressure oil pump. Besides, it also has the mechanic examine the engine for any damage caused by low oil pressure.
(iv) Ensure that you verify that there is no oil in the coolant reservoir.
(V) Change your engine oil filter on a regular schedule and top off the engine with fresh oil in between changes.
FAQs
When the high pressure oil pump goes out in a Ford 6.0, it causes the hydraulic lifters. It makes too much noise. It’s really annoying. The lifter noise usually comes from the front of the engine. It gets progressively louder until it is finally replaced.
Usually, it delivers or provides the high pressure oil to the fuel injectors. The purpose of this pump is to ensure that all the oil needs in the engine are delivered to it. It does this by passing fluid through a series of check valves. it will deliver more and more mineral oil to the cylinder surfaces.
The high pressure oil pump (HPOP) is found on the rear of the engine. It is a component of the oil system responsible for putting oil. This component is found in almost every truck, van and SUV. Because it is necessary for the transmission to work properly.
You can understand if there is a problem with the oil pump by looking at several signs. If you are a complete beginner, then you can understand by seeing Excessive black smoke and Coolant Leak. Besides, if you have a little experience then you can identify by Leaking fuel injectors, EGR Valve Problems and Leaking oil cooler o-rings.
Final Words
If you notice any of the mentioned above symptoms, you should be aware from today. If you do not pay attention to it, your vehicle may become damaged permanently. It means, if the pressure oil pump fails, many major damage can happen.
So, it’s high time to contact the nearest workshop as soon as possible. On the other hand, If you have your own experience, then replace it yourself. Finally, I want to say that this fear can be reduced a lot with regular maintenance.
